Canon IP 2770

Print baruku telah siap. ‘Berdiri’ megah diujung kamar..hhee. Canon IP 2770 emang bukan print special. Just an Ordinary printer with common features. Tapi aku berharap dia bisa awet bersamaku.
Ini dia spesifikasinya :

Advanced Guide Troubleshooting
Contents > Overview of the Printer > Main Components
Main Components
Front View
Rear View
Inside View
Front View

(1) Front Cover
Open to replace the FINE Cartridges or remove jammed paper inside the printer.
(2) Paper Guides
Slide to align with both sides of the paper stack.
(3) Rear Tray
Load various sizes or types of paper which you can use on the printer. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
See Loading Paper.
(4) Paper Support
Open to load paper in the Rear Tray.
(5) Paper Output Slot
Printouts are output. Do not place any object in front of it.

(6) ON button
Press to turn the power on or off.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that the POWER lamp is not lit. If the power plug is disconnected from the wall outlet while the POWER lamp is lit or flashing, the printer may become unable to print properly since the Print Head is not protected.
Note
Auto power on/off feature
You can set the printer to turn on or off automatically.
- Auto Power On: Automatically turns on the printer when data is sent from the computer.
- Auto Power Off: Automatically turns off the printer when no data is sent for a specified interval.
Specify this setting on the Maintenance sheet of the printer driver setup window.
For details on the settings, refer to the on-screen manual: Advanced Guide.

(7) POWER lamp
Lights green after flashing when the power is turned on.
(8) Alarm lamp
Flashes orange when an error occurs, such as paper-out or ink-out.
Note
POWER and Alarm lamps
You can check the status of the printer by the POWER and Alarm lamps.
- POWER lamp is off: The power is off.
- POWER lamp lights green: The printer is ready to print.
- POWER lamp flashes green: The printer is getting ready to print, or printing is in progress.
- Alarm lamp flashes orange: An error has occurred and the printer is not ready to print. For details, refer to "Troubleshooting" in the on-screen manual: Advanced Guide.
- POWER lamp flashes green and Alarm lamp flashes orange alternately: An error that requires contacting the service center may have occurred. For details, refer to "Troubleshooting" in the on-screen manual: Advanced Guide.

(9) RESUME/CANCEL button
Press to cancel a print job in progress. You can press this button to release from printer error status and resume printing, after the printer problem is resolved.
Rear View

(10) USB Port
Plug in the USB cable to connect the printer with a computer.
Important
Do not touch the metal casing.
Do not plug in or unplug the USB cable while printing.

(11) Power Cord Connector
Plug in the supplied power cord.
Inside View

(12) Ink Cartridge Locking Covers
Lock the FINE Cartridges into place.
(13) FINE Cartridge Holder
Install the FINE Cartridges.
The Color FINE Cartridge should be installed into the left slot ( ) and the Black FINE Cartridge should be installed into the right slot ( ).
(14) FINE Cartridges (Ink Cartridges)
A replaceable cartridge that is integrated with Print Head and ink tank.
Note
For details on installing the FINE Cartridges, refer to the printed manual: Getting Started.

Important
The area (A) indicated in the figure below may be splattered with ink. It does not affect the performance of the printer.
Do not touch the area (A). The printer may not print properly if you touch it.



Page top